Our DIY Full Suspension Mini Bike is FINISHED! | SIMPLE Mini Dirt Bike Pt. 2

  Үзсэн тоо 119,554


Сарын өмнө

Our custom mini bike build is finished! We built a full suspension mini bike from scratch in just a few days, and it's ready for a ride! In today's episode, we build a swing arm, build brackets for our front brake, mount the fuel tank, seat, engine, exhaust, and everything else we need to ride this 212cc mini bike!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
-----------------Go Power Sports Parts Used in Today’s Video----------------
Tell them CarsandCameras sent you at checkout:
Tillotson 212 Electric Start: bit.ly/2OAJQRe
Mini bike kick stand: bit.ly/2PSgOwD
Mini bike suspension kit (front forks): bit.ly/3eo7smx
Mini bike handlebars (mega moto): bit.ly/30vFQ6K
Foot peg covers: bit.ly/30xOC4i
Mini bike throttle kit: bit.ly/2xW87bQ
Go Power Sports: goo.gl/c2Tz6o
Pit bike brake cable: www.ebay.com/itm/143298113095
10" wheels and tires: www.ebay.com/itm/264978752460
Seat: www.ebay.com/itm/154041579826
Shock: the shock we ordered and set the bike up for was very poor quality. When we find a new one, this link will be updated in a newer episode.
We used a fuel tank from a Honda Z50R, we used 1.25" tubing 0.083 wall for the upper frame rail, and 1" tubing 0.083 wall for the rest of the chassis (the build isn't completed yet but we wished we had used a slightly thinner wall tubing).

GET $100 OFF any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/discount/CARSANDCAMERAS
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Balin Weatherhead
Balin Weatherhead 24 өдрийн өмнө
This is probably a weird question but do bikes of this size and age come with titles?
Warren Krywko
Warren Krywko 29 өдрийн өмнө
Falling rate suspension is the issue. You need rising rate.falling rate means is gets softer as it compresses.
The Old Fart's Channel
The Old Fart's Channel Сарын өмнө
Name it Fudpucker.
Dragon Rider
Dragon Rider Сарын өмнө
I use semi truck mud flaps to absorb the shock on my mini bikes and go-karts. They cheap to
dblizz68 Сарын өмнө
Matching the color of your C-10? Why not call it a Chev-mini or C-teni-mini? And yes, we need a build off between you guys.
Eddy Сарын өмнө
They definitely need to make a cafe racer
Hebu The Lone Wolf
Hebu The Lone Wolf Сарын өмнө
2 shocks one both sides like on Honda Monkey could work. makes it stiffer and u can angle them better. the current angle is bad. it should be on that angle when its compressed and not when its resting. the angle when its compressed is extremely taxing on it and wont last long, most likely the shaft is gonna bed or at worst case snap in half
Mannequins Mazzara
Mannequins Mazzara Сарын өмнө
19:10 smoke?
fudgun Сарын өмнө
Should be able to use shorter chunks of rubber with washers. That way you get SOME vibration dampening without having to worry about the chain so much.
Brandon Hewitt
Brandon Hewitt Сарын өмнө
You guys really should've left the swing arm long. I thought it looked cooler & it would've rode alot better. Cool build
Edward Weisenburg
Edward Weisenburg Сарын өмнө
Attention k Mart shoppers there's a sprung spring in isle one !!!! LoL 😂
JAYDEN_RAY_69 Сарын өмнө
Name it Jeff
Gokarts, Minibikes, and more!
Gokarts, Minibikes, and more! Сарын өмнө
Ned to do a 200cc in there like on the home made shifter kart make it look like a mini scrambler and make a better looking swing arm
Wayne Flanigan
Wayne Flanigan Сарын өмнө
Measure many times, cut once.
Bryson damron
Bryson damron Сарын өмнө
honda blastster
Brayden Daws
Brayden Daws Сарын өмнө
Name it Crossfire
Cardwell Bros Dirtbike DIY
Cardwell Bros Dirtbike DIY Сарын өмнө
name your cool mini bike or fastboy
ETM Сарын өмнө
Angel Lopp
Angel Lopp Сарын өмнө
I would love to see a big wheel mini bike/ 3 wheeler to mini bike
Bob Mal
Bob Mal Сарын өмнө
One of your future video projects should be to build a mini bike lift table for building future bikes. Your plasma cutter could make some cool parts for it and it would not only benefit you guys but also subscribers who want to build the same thing and get off the shop floor.
Moldy mold
Moldy mold Сарын өмнө
SportbikerNZ Сарын өмнө
Sweet project!
aalecustom Сарын өмнө
it looks sku good boys. But you must have moved the rear spring. The angle of it is completely wrong, it should be more perpendicular to the rear swingarm when pressed together. it will make it stronger when compressed.
Chris Ross
Chris Ross Сарын өмнө
If theres to much engine movement from the rubber mounting beneath, could you put a couple rubber mounts on the top also? (Factory tank mounts)
Diji Сарын өмнө
DSR Сарын өмнө
Really like the videos. Just hard to find 30 minutes to watch a video
Shaun Zamenick
Shaun Zamenick Сарын өмнө
Name it The Dugout
Blaine Mcconnell
Blaine Mcconnell Сарын өмнө
the out law gaming & out doors
the out law gaming & out doors Сарын өмнө
Zachary Prosper
Zachary Prosper Сарын өмнө
Hell yeah brother
Cristian Lyman
Cristian Lyman Сарын өмнө
It’s like a mini dirt bobber
Cory Massey
Cory Massey Сарын өмнө
Name her betsy or billie the tilli
christopher martin
christopher martin Сарын өмнө
Try sandwiching the rubber bushes between 2 metal washers it should stiffen up the Slack
Landon Woods
Landon Woods Сарын өмнө
dexter270788 Сарын өмнө
slam a chainguide on it than the enginewobble is no mo problem 👌🏻
Sergio Lopez
Sergio Lopez Сарын өмнө
Hey buddy I think you should call it the dominantor
matt Lamonica
matt Lamonica Сарын өмнө
Mini dirt
Nicholas Schafer
Nicholas Schafer Сарын өмнө
Donah hondason
Matt W
Matt W Сарын өмнө
CeCe the pit n rip
Andrew Morris
Andrew Morris Сарын өмнө
It's a baby cafe racer. Kinda like a rat rod version of a mini bike also 😂. Rat Racer
MIKE Lavalley
MIKE Lavalley Сарын өмнө
Maybe aa ltl shorter rubber engine mount made from stiffer rubber,and it might take care of the "Dancing Tillotson"...maybe? Lol. B Safe Guys.
Ron De Joux
Ron De Joux Сарын өмнө
KAREN , I think.
Carson Hendee
Carson Hendee Сарын өмнө
What battery did you use for this?
Isapongo ?
Isapongo ? Сарын өмнө
Name it beans
Oliver Tait
Oliver Tait Сарын өмнө
Hey guys I am really interested in the z 50 in the background I am wondering if it could be for sale.😁
Frederick Giordiano
Frederick Giordiano Сарын өмнө
They have discovered why most dirtbikes have a shock linkage.
dan marshall
dan marshall Сарын өмнө
Name it Tonda. Honda/Tillison
LB Venter
LB Venter Сарын өмнө
Kevin Сарын өмнө
Bob...just Bob
Tyler Shea
Tyler Shea Сарын өмнө
Should have named it Karen
Giovanni Tiziani
Giovanni Tiziani Сарын өмнө
call it Antonello!
Brad Taylor
Brad Taylor Сарын өмнө
The shock not only has to support the weight of the rider, but also half the weight of the mini-bike and the mass forces imposed on the shock during compression. I'd be surprised if that little shock will work. We will see.
Daniel Darch
Daniel Darch Сарын өмнө
You should call it the mini monster Keep up the good work guys
Leon Battersby
Leon Battersby Сарын өмнө
Call it frank after Frankenstein
watahyahknow Сарын өмнө
nicest would be to put the axle shaft for the rear fork through the back pulley of the cvt drive , that way the chain coming off the pulley goes straight to the rearwheel and shouldnt slack with the suspension all the way in , though youre way should work too m my way can put the wheels closer together it will mount the motor solidly to the frame though donna you know like this woman i know ...... the one with all the nice features .......
Matthew Rogers
Matthew Rogers Сарын өмнө
name it the dude
John Hill
John Hill Сарын өмнө
Great video guys. This Old Man loving it. 😎💝💝
Elliott Mason
Elliott Mason Сарын өмнө
How about Hondason as the name because you got Honda and Tillotson
Danny Bethell
Danny Bethell Сарын өмнө
Making big guys look good on small bikes since 2021 🛵
Danny Bethell
Danny Bethell Сарын өмнө
Thump-Star.... Stump Jumper... Nut Roaster... Piles-Driver 🤠
Damien Catapano
Damien Catapano Сарын өмнө
Definitely name it Scrappy
Deven Wood
Deven Wood Сарын өмнө
the rat!
Frank G
Frank G Сарын өмнө
Are those 30 series torque converters strong enough for 15hp, I know the spec says it isn't but I've seen you putting them on some beasty engines? Realistically?
Jason Crow
Jason Crow Сарын өмнө
Name it The bigger foot
Richard Medina
Richard Medina Сарын өмнө
Hey guys! From one fabricator to the next... thats a nice build. Im sorta doing the same thing you guys are, in building something outa nothing, and wonder... would you ever share the work load? Notice i didnt say "Limelight" thats because im not the gatta be on cam kind of guy... but i am the gatta buiild kind of guy... uh example... wouldnt a cantilever work on that pesky rear suspention? It would eliminate alot of need from the spring by placing the initial force in the linkage...Also it wouldnt take up much more space... actually it wouldnt take up any more than what you already are! And, dont you guys think that a top motor mount is necessary?
Nick W
Nick W Сарын өмнө
The angle on that shock lol, come on guys, you’re way better than that, you’d be ideal with like a CRF 110 rear shock and the right angle
richToFEn1337 Сарын өмнө
@CarsandCameras you should look at a shock linkage like what dirtbikes have for that rear shock there isnt much space to lay the shock down more without giving it that stinkbug stance and a new better air filled shock wouldn't hurt either after the better shock that frame will be able to take on crfs and xr80s
Rougaroux Сарын өмнө
I think the name of the mini bike needs to be Hamarabi or HammerRobby. 😆 Y’all know IT’LL BE FINE
jay six
jay six Сарын өмнө
Name it monda...
Tyler N
Tyler N Сарын өмнө
That spring/shock setup is way too small. Shoulda noticed that issue as soon as you got it.
Matt Craft
Matt Craft Сарын өмнө
I love the videos yall make. But I can not stand behind Go Power Sports. They dont give a rat's a$$ about customer service or fixing there mistakes or hell replacing a part that is faulty from the manufacturer.
Michael VanGundy
Michael VanGundy Сарын өмнө
nealp06 Сарын өмнө
So when Ike starts to tac weld off the battery my iPad fell. Made me jump, lol. The battery knocked it over.
Kennie Lengyel
Kennie Lengyel Сарын өмнө
I thought maybe u can drill a bigger hole in rubber engine mounts and slide a pipe through that's slightly shorter than rubber mount, so you still have some squeeze to it
PW Сарын өмнө
Do you got a link for the rubber mounts?
Brody Jo
Brody Jo Сарын өмнө
Just buy a Honda 70 shock
OneN Only
OneN Only Сарын өмнө
Never seen this man with a full beard and I feel like I’ve watched quite a bit of videos wtf you lost 15 years without a beatd
mike n
mike n Сарын өмнө
Homemade street legal would be nice
Matt Mkamp
Matt Mkamp Сарын өмнө
you guys should get an old dirt bike like xr 200 and put an 420cc and 40 series on it would love to see how it performs
t mod
t mod Сарын өмнө
red rocket
Dave Z
Dave Z Сарын өмнө
Call it Rooster. You need a chicken in the yard.
Renard Shotter
Renard Shotter Сарын өмнө
Do a drop seat 4” cut the back bone and drop it no fear 🥺
The Trikester
The Trikester Сарын өмнө
As to the rubber motor mounts. how do you think they would do on a belt driven instead of a chain driven. I have an Owosso Explorer that has a torque converter system built into the frame kinda. Trying to get a nice smooth ride for the road. Any comments to help. Thanks.
Brian James
Brian James Сарын өмнө
How about Shonda?? Rhonda andShonda
ian builds
ian builds Сарын өмнө
mine's got a trans
ian builds
ian builds Сарын өмнө
and a springer front end... mostly cuz i didnt have forks at the time but now i'm comitted...
Marcus Allen
Marcus Allen Сарын өмнө
Robert Rimmer
Robert Rimmer Сарын өмнө
call it "The Mayhem"!
fivetwoess Сарын өмнө
fivetwoess Сарын өмнө
pronounced "hon dee nee" of course😉
James Musser
James Musser Сарын өмнө
call it the jive as for John and Isaac
Chico Сарын өмнө
the suspension must have a second nut to lock
Henry Escat
Henry Escat Сарын өмнө
I think that spring is TOO SHORT & TOO SOFT!
Henry Escat
Henry Escat Сарын өмнө
I would cut like 2" off the handlebar length. It makes riding past trees safer.
Henry Escat
Henry Escat Сарын өмнө
I would totally use those springs.. Just lower the spring mounts a little. It will lower when you sit on it.
rippen outdoors
rippen outdoors Сарын өмнө
u should call it they franken bike
Xander Blade
Xander Blade Сарын өмнө
Bent spring time
grunt Сарын өмнө
I'd call it the hondillac, thing is lux
grunt Сарын өмнө
David Simpson
David Simpson Сарын өмнө
i think for the mounts to work you might wont a couple of the top of the engine also after all old cars had the engine and gearbox mounted with similer mounts
James Tinnel
James Tinnel Сарын өмнө
Ike Frankenstein
Stephanie Jones
Stephanie Jones Сарын өмнө
Come on guys. Using old car battery as a block and welding next to it. Safety 1st. Have you ever seen a battery explosion. Real bad. You could go blind or die. Thumbs down for safety.
B.Tamir - Hulsnii munguur (Parody cover by Molpedia)
Molpedia TV
Үзсэн тоо 53мянга.
Billie Eilish - Your Power (Official Music Video)
Үзсэн тоо 48сая
5-Minute Crafts LIKE
Үзсэн тоо 2,6сая
80's Honda 3 Wheelers Go HEAD TO HEAD | 140cc ATC 70 vs. ATC 200
Үзсэн тоо 116мянга.
$150 FORGOTTEN Honda CB750 | Will it Run?
Үзсэн тоо 114мянга.
DIY Electric Bike 65km/h Using 1500W E-Bike Conversion Kit
3 Speed & Reverse Go Kart Gearbox Homemade Part 2
rather B welding
Үзсэн тоо 189мянга.
Mr. Z
Үзсэн тоо 631мянга.
Making of futuristic motorcycle - I Modified Scooter to  the two-wheeled vehicle
Custom Mini Bike FINALE! Our Mini Dirt Bike gets PAINT + Looks EPIC!
Үзсэн тоо 103мянга.
B.Tamir - Hulsnii munguur (Parody cover by Molpedia)
Molpedia TV
Үзсэн тоо 53мянга.
Billie Eilish - Your Power (Official Music Video)
Үзсэн тоо 48сая
5-Minute Crafts LIKE
Үзсэн тоо 2,6сая