4WD Power Wheels Go Kart Build SEND OFF! Our Bronco Kart is FINISHED

  Үзсэн тоо 239,372

CarsandCameras

2 сарын өмнө

Our 228cc powered 4WD Ford Bronco power wheels go kart is finally finished! We trim and fit the body, build a new better looking exhaust, and go for a test drive! This project proved to be challenging because the vehicle is so small, but I think it was worth it in the end. The looks are killer, the acceleration is potent, and the handling is decent (after fine tuning our steering).
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
-----------------Go Power Sports Parts Used in Today’s Video----------------
Tell them CarsandCameras sent you at checkout:
Racing mufflers listed below- they're still loud, but great for performance:
1” racing silencer: bit.ly/3baJkS7
1.25” racing silencer: bit.ly/3uQxBQD
1 5/16” Racing silencer: bit.ly/30SNRnM
Go Power Sports: goo.gl/c2Tz6o
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/discount/CARSANDCAMERAS
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Сэтгэгдлүүд
Duner250R
Duner250R 12 өдрийн өмнө
No where near as cool as Grind Hard's builds. NOT EVEN CLOSE LMFAO
ScrappyDog Finance
ScrappyDog Finance Сарын өмнө
YOU GUYS USE THE SAME ENGINE IN EVERYTHING???
HD MAN
HD MAN Сарын өмнө
Nice beard
ed werts
ed werts Сарын өмнө
I think you guys should open an actual race dirt track on the property for go karts or race mowers. I used to race go karts on a dirt track here were i live and i was a blast. I never won any trophies i wrecked more than anything lol
Hebu The Lone Wolf
Hebu The Lone Wolf Сарын өмнө
larger size chassis would be nice. like a go kart with those wheels and and springs
Diesel Customs
Diesel Customs Сарын өмнө
John is like lsaac’s son he wears the gloves but doesn’t do anything
Rand Bradbury
Rand Bradbury Сарын өмнө
Loved this build. I wish Isaac used diamond plate for the floor pieces that connect the two plastic body panels. That would've looked great. Maybe do rock crawl gearing for the revival video in two years? It'd be hilarious to watch that little suspension work over some rocks.
James Jones
James Jones Сарын өмнө
Seeing off set channel lock pliers used on a hex nut drives me crazy. A man is only as good as his tool!
Justin Goin
Justin Goin Сарын өмнө
You guys should build a big tire rat rod cart or a shopping cart go cart and great finish to the build thanks for the content
Felix Ferreiro
Felix Ferreiro Сарын өмнө
Man you don't have ideia how much i like to find problems and projects mistakes , but this One have a Big BIG PROBLEM , ITS NOT MINE !!!!!!!!! TO FIX THAT HUGE PROBLEM SEND IT TO ME AND EVERYTHING WILL BE ALRIGHT 😂
Cody Smith
Cody Smith Сарын өмнө
I see those Tillotson blocks I race dirt karts I still have one i havent used im Not excited to use it because I popped a motor but positive about a cast brace block
geremi walubengo
geremi walubengo Сарын өмнө
whaaaat! issac's beard
daniel Imbriaco
daniel Imbriaco Сарын өмнө
turn it upside down:the exaust
ben halstead
ben halstead Сарын өмнө
Maybe it's just me but anybody else thinking this would look really painted up as kenny gogo action bronco from south park
Ozark prepper
Ozark prepper Сарын өмнө
What a blast. I thought for sure you were going to fly out when you jumped it. And I agree with you. You could lengthen it but that would defeat the whole purpose of the build.
DusterNutbar
DusterNutbar Сарын өмнө
Nothing but ads.. good lord 🤦‍♂️
Kaiden Meeker
Kaiden Meeker Сарын өмнө
Bro I’ve been watching y’all come so far! Please keep making great videos they always make my day
Dragon Rider
Dragon Rider Сарын өмнө
Been watching since before rat rode wagon
Dylan Campbell
Dylan Campbell Сарын өмнө
Only 47k to go till a mill been here since you guys were at 50k lol
rtm IV
rtm IV Сарын өмнө
Subscribed
Kyle Litman
Kyle Litman Сарын өмнө
I'm convinced issac is the voice for hank from king of the hill dam it Bobby hahaha
Max Taylor
Max Taylor Сарын өмнө
Grave bronco
Donald Jones
Donald Jones Сарын өмнө
I know you mention it from time to time but what is the rust converter paint you use?
LightcapMath
LightcapMath Сарын өмнө
Fruition...love it
Cruzerlou Outdoors
Cruzerlou Outdoors Сарын өмнө
You csn use aviation wire or bailing wire to secure the header wrap. That's what I did on my TT500.
Troy Tubbs
Troy Tubbs Сарын өмнө
You know what we need is a mini mud truck on 37” BKT’s!! That’s what we need
TM Productions
TM Productions Сарын өмнө
I made a new account and totally missed yall the last year im so glad you guys are still doing this I've been a fan since day one yall take ❤
Nick Jordan
Nick Jordan Сарын өмнө
An idea build something with a snowmobile motor I'm working on a go-kart it's a one-wheel peal. Doing a live axle where's the snowmobile motor
james games
james games Сарын өмнө
I think it would be awesome if you guys made a Mini monster truck semi out of the mack anthem power wheels and put a 10hp motor in it please if you see my comment please heart it it would make my day keep up the great builds I'll always be a subscriber
Red S0vietArtilery
Red S0vietArtilery Сарын өмнө
I want you to duel with plumbing co
Nitrous Boyz
Nitrous Boyz Сарын өмнө
Sounds lean @ top end
Rich Morgenstein
Rich Morgenstein Сарын өмнө
4 wheeler frame pretty much? power wheels top on it?
Russ Burton
Russ Burton Сарын өмнө
sharing your videos in my group fabrication nation on facebook cause love your work and gve you more exposure?
Russ Burton
Russ Burton Сарын өмнө
like your advice on wrapping headers cause guys in my other group Triumph choppers like the advice
Toast
Toast Сарын өмнө
I'm sure you guys remember the tank at Mini Mayhem Spring 2019, right? so hear me out... there's a Power Wheels tank... I think you guys know where I'm going with this lmao
Matthew McWhorter
Matthew McWhorter Сарын өмнө
jet kart
Stuart Marshall
Stuart Marshall Сарын өмнө
Y'all nailed the suspension design. Looks like a professional Baja truck in miniature floating over those bumps.
kelly hanning
kelly hanning Сарын өмнө
Stick to gokarts
Jerry Matthews
Jerry Matthews Сарын өмнө
You guys built a very cool little Bronco, good video!!
don seymour
don seymour Сарын өмнө
Awesome build Gentlemen, new sub here. Go small or Go Home...
T R Games
T R Games Сарын өмнө
What speedometer app do you use?
Chris Crom
Chris Crom Сарын өмнө
You guys should build a toy hauler
DJ Studios
DJ Studios Сарын өмнө
Build an exotic super kart
Big Adub
Big Adub Сарын өмнө
NO MUFFLER !!
Angel Lopp
Angel Lopp Сарын өмнө
3 wheeler to mini bike or a 2 wheel drive mini bike
Drop Point
Drop Point Сарын өмнө
Really nice i would like to put in a request for you to build alternate styles of body for this from sheet metal make you a homemade planishing hammer from an air chisel and a diy english wheel and then you can curl up your mustaches and make some fenders and body panels build it off a golf cart frame maybe put in a 750 bike engine or whatever make it look like a 80s short bed chevy cut out a peice of bed floor from a real truck to get the ribs lol good god i could go all day man i would love to toss you some ideas that you might consider . great video👍 oh and on the bronco i was going to say you should make a ram scoop that covers the top and serve as a shield for a little protection for the driver from the engine compartment.
Spoopss
Spoopss Сарын өмнө
pov wrench is epic
Brian Hanel
Brian Hanel Сарын өмнө
When are you guys going too grow up
Chase Mahaffey
Chase Mahaffey Сарын өмнө
Ok blow this comment up if u agree they should make a big project with big power and a 2 seater for more fun
Bikes, boards and backflips
Bikes, boards and backflips Сарын өмнө
You should build a stand up gas motor scooter with 15 inch wheels
Remnant D
Remnant D Сарын өмнө
I wouldn't call it easier, but if you soak that heat wrap in water it'll go on a bit better at least that's how I've seen it done.
WildBill413
WildBill413 2 сарын өмнө
Flip out foot pegs, or side bars with expanded metal for your feet outside the body for when things go super fast would make that ridable by taller folks. The steel building on the ground looks good! The 212 mini modified replica drift racer on my channel did 43 Mph on the public street, glad it has a cage going that fast...
WildBill413
WildBill413 2 сарын өмнө
The 212 mini modified replica drift racer on my channel did 43 Mph on the public street, glad it has a cage going that fast...
MIKER
MIKER 2 сарын өмнө
Ike gots fur.....
Cray
Cray 2 сарын өмнө
make a race track too. race all the creations youv'e made see which one is the fastest
Cray
Cray 2 сарын өмнө
Use Both of the Mofler's make it Dual Exhaust
James Kennedy
James Kennedy 2 сарын өмнө
Do another turbo build!!
Henry Dycha
Henry Dycha 2 сарын өмнө
I wish I could swap my Evo bike into something like this, can't ride two wheels anymore. Cause my health.
Papa Clod-hopper
Papa Clod-hopper 2 сарын өмнө
For wrapping pipes like that. I put one end of the wrap in a vice. Then start wrapping and you can pull your pipe away from the vice to tighten it as you simply rotate your pipe.
Terry Dacus
Terry Dacus 2 сарын өмнө
Did anyone else see the building materials in the yard
Jordan Wynne
Jordan Wynne 2 сарын өмнө
the pov is a good angle
Casper Högbäck
Casper Högbäck 2 сарын өмнө
put a hood pipe on it then it wont be in the way the and it look cool then
chase thomasson
chase thomasson 2 сарын өмнө
Pov wrench it good sir
Nickelodeon
Nickelodeon 2 сарын өмнө
Issac reminds me of Ricky Bobby If ya ain’t 1st your last
Elixir Fn
Elixir Fn 2 сарын өмнө
Bring back the dragster plz
netwt42oz
netwt42oz 2 сарын өмнө
I've been watching since the very first go cart video you ever made!
Mr. Braapalicious
Mr. Braapalicious 2 сарын өмнө
you did a really fun build and looks absolutely a blast to drive! Great Jobs boys. 👍😲✌️
Mark Daywalt
Mark Daywalt 2 сарын өмнө
ike what are you hiding your face is enlarged on one side
Ricky White
Ricky White 2 сарын өмнө
Or a harley davidson powered three wheeler
Ricky White
Ricky White 2 сарын өмнө
Harley Davidson powered mini sand rail
TeamPikaWWG
TeamPikaWWG 2 сарын өмнө
Make a shopping cart go cart please 😂
Xeanus
Xeanus 2 сарын өмнө
Just tape the camera to the wrench problem solved
Dragon800
Dragon800 2 сарын өмнө
i like the pov. i like it in other types of videos too :D
Jason Tucker
Jason Tucker 2 сарын өмнө
I need a casket cart for the hearse!.... lol
cade webster
cade webster 2 сарын өмнө
Build a drag mini bike with a big engine
Randy Woodward
Randy Woodward 2 сарын өмнө
Put your on your hat
dooman700
dooman700 2 сарын өмнө
Header wrap over rated
dang gang
dang gang 2 сарын өмнө
you guys oh do i have a build for you, build a crosscart nascar
franko send it
franko send it 2 сарын өмнө
Look at that u just beat the latest charger blazer and Ford's bronco
brian daum
brian daum 2 сарын өмнө
you guys mite want to get a hat for mounting a go pro for P.O.V work
Brian Dinges
Brian Dinges 2 сарын өмнө
Head mount for a gopro would make a better POV wrenching experience.
jane faulkner
jane faulkner 2 сарын өмнө
How about fitting a back rest to it, you could make it look like a headrest, and won't feel so sketchy over jumps.
Walker
Walker 2 сарын өмнө
Ok... but what if they make a Kei Car
Tom Petramanos
Tom Petramanos 2 сарын өмнө
How does isaacs beard make him look younger
J Irvine
J Irvine 2 сарын өмнө
I need that E46 Wagon
Jacob Armstrong
Jacob Armstrong 2 сарын өмнө
If you dip muffler wrap cloth in water, like set the entire roll In a bucket of water then put it on wet and leave it to dry it’s easy to mold and gets tighter as it dries
Austin Charles
Austin Charles 2 сарын өмнө
You guys should swap a quad engine into a yerf dog style frame and lift it for bigger tires and better suspension
Pianeas 701
Pianeas 701 2 сарын өмнө
Just buy a quad!
Joey Hopkins
Joey Hopkins 2 сарын өмнө
Would love to see an off-road lawn tractor build, this thing is awesome
Chris hilder
Chris hilder 2 сарын өмнө
Build another drag cart or bring the old one back!
Garth Kerr
Garth Kerr 2 сарын өмнө
I think it would be pretty cool to see you two build a rock crawler 🤔
Quentin Pratt
Quentin Pratt 2 сарын өмнө
They have finally accomplished the perfect suspension
Reitzy B
Reitzy B 2 сарын өмнө
Y'all should build a small pickup truck with a predator engine in it...thatd be pretty cool...with a stereo and use the original gear box 4 or 5 speed...ive seen a kid do it long ago on the MNpost....i may even try and do it...itd be awesome out at my buddys property...find like n old mid sized truck n do it...aint gotta be fast just functional
Shawn Waters
Shawn Waters 2 сарын өмнө
I found the next project for you gentlemen... watch a movie called silver bullet made in 1985. 30 minutes in the movie u will see what I'm talking about
Extreme atv offroad
Extreme atv offroad 2 сарын өмнө
nice 👍
Extreme atv offroad
Extreme atv offroad 2 сарын өмнө
🤝👍🙏
Troy Thornburg
Troy Thornburg 2 сарын өмнө
Do a mini chopper motorcycle!!
Syrus Berman
Syrus Berman 2 сарын өмнө
What is your opinion on a 22 or 24 hp vertical engine with 7 inch pulley on front and 3 inch on the rear axle on a 1991 5 speed sears craftsman the original one was an 11 hp briggs
RedBeardJoe
RedBeardJoe 2 сарын өмнө
Locost 7 with a busa or a ducati
Big Mike
Big Mike 2 сарын өмнө
This is totally starting to look like grind hard plumbing channel
GearHead Garage
GearHead Garage 2 сарын өмнө
Build something similar to the power wheels but build it around one of the fiberglass body's you have
Kevin Logan
Kevin Logan 2 сарын өмнө
Y’all should build a full blown 420 stretched CT200U drag bike
1000cc Trophy Truck TRANSFORMATION | Lift + Splatter Paint!
28:08
CarsandCameras
Үзсэн тоо 212мянга.
[HYBE INSIGHT] EXPERIENCE MUSIC - BTS (방탄소년단)
1:17
HYBE LABELS
Үзсэн тоо 2,4сая
Zorigt - Karaoke "ТУСГАЙ ҮҮРГИЙН НИСЛЭГ"
13:07
UB Comedy Club
Үзсэн тоо 377мянга.
ЯПОНЫ ХАРААГДСАН ZOOM УУЛЗАЛТ (2021)
11:25
World's Fastest 1WD Go Kart?! | Built 212 Swap, HUGE Burnouts!
17:42
CarsandCameras
Үзсэн тоо 952мянга.
Jet Powered Go Kart
17:11
Warped Perception
Үзсэн тоо 2сая
We Bought an ABANDONED 750cc Swapped 4 Wheeler! Meet the HON-DUKI!
36:39
CarsandCameras
Үзсэн тоо 396мянга.
Off Road Vintage Go Kart Kit Build Project
29:40
Go Power Sports
Үзсэн тоо 210мянга.
Twin Supercharged 4 Cylinder Nitro RC Engine
15:44
Warped Perception
Үзсэн тоо 1,3сая
550cc Little Tikes Car Revival | 50HP Tire Killer Go Kart!
26:33
CarsandCameras
Үзсэн тоо 134мянга.
Yard Kart Racing Head to Head | 200cc vs. 212cc
17:56
CarsandCameras
Үзсэн тоо 832мянга.
1000cc Mini Trophy Truck FULL SEND | TROPHY KART FINALE
30:05
CarsandCameras
Үзсэн тоо 215мянга.
[HYBE INSIGHT] EXPERIENCE MUSIC - BTS (방탄소년단)
1:17
HYBE LABELS
Үзсэн тоо 2,4сая
Zorigt - Karaoke "ТУСГАЙ ҮҮРГИЙН НИСЛЭГ"
13:07
UB Comedy Club
Үзсэн тоо 377мянга.
ЯПОНЫ ХАРААГДСАН ZOOM УУЛЗАЛТ (2021)
11:25