4WD Power Wheels Go Kart First Drive! 228cc Custom 4X4 Ford Bronco Lives!

  Үзсэн тоо 179,250


2 сарын өмнө

Our custom built Ford Bronco Power Wheels go kart drives for the first time! We still have a ton of optimization and tuning to do on this go kart, including swapping to a much shorter gear ratio (the theoretical top speed is over 100mph, but acceleration is poor and it's hard on the torque converter belt), fabricating and installing a floor, hand controls for gas and brake, and stiffening the suspension. So far, it's great! Definitely one of the smoothest first drive's we've had. The steering radius isn't great, and we're limited by the CV axles in the front suspension, and because both front and rear axles are always locked, it tends to understeer on tight corners. Other than that, this thing is great.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
-----------------Go Power Sports Parts Used in Today’s Video----------------
Tell them CarsandCameras sent you at checkout:
Live axle kit: bit.ly/359NJ1J
28mm Mikuni flat slide carburetor: bit.ly/3oWSFRJ
Go Power Sports: goo.gl/c2Tz6o
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/discount/CARSANDCAMERAS
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Dax Carr
Dax Carr Сарын өмнө
Put a stack on it with Tommy knockers
Dax Carr
Dax Carr Сарын өмнө
I see you are no longer using the nine dollar harbor freight grinder anymore
Dax Carr
Dax Carr Сарын өмнө
Is it about time to purchase the harbor freight $40 tire mounting device?
Pat Scotty
Pat Scotty Сарын өмнө
And walk for sure LOL 😂
10 2
10 2 Сарын өмнө
I hope you can add a Korean translation function
Eric Y
Eric Y Сарын өмнө
Handle bars might be the way to go for Ike’s sake
Paul Deatherage
Paul Deatherage Сарын өмнө
Can you all out 4 wheel steering on it or maybe show how you might could do it
Loren Mars
Loren Mars Сарын өмнө
A little chrome rocker to tie the front and rear body together. Stamped JEEP.
Joe Anderson
Joe Anderson Сарын өмнө
Isaac needs a Camelbak full of gasoline for such occasions.
Jay Titus
Jay Titus 2 сарын өмнө
Where is your holiday burnout? See VGG to see what I mean. Gitter done!
Bert Kelly
Bert Kelly 2 сарын өмнө
Why would you put a 7 ft tall dude into a car made for a 4 yo? Cut the car in half and make it bigger.
YUKI JINJUJI 2 сарын өмнө
Ricky bobby I told you that damn steering joint would not work.
Mo Carpenter
Mo Carpenter 2 сарын өмнө
Ohh yeah let's hold the gas tank.. Ummm Death Trap ring any bells ?? LoL Awesome build fellas
froggers garage
froggers garage 2 сарын өмнө
"Dang it bobby it's all we have" 😂😂 that's hilarious
SFTW ORANGE 2 сарын өмнө
This thing isn’t your guy’s best work tbh the straight axle like was originally planned would give it a actual crawler feel it seems way underpowered for the independent suspension
NITRO NEAL 2 сарын өмнө
Your wobbly thing for your steering, it will be fine
Armadillo 2 сарын өмнө
For the gas tank what if you took a plastic spare tire wheel and mount it on the back and fill her up
Riley Fenley
Riley Fenley 2 сарын өмнө
For those having a brain fart about what the the wobble socket actually is called its a swivel socket.
Hellwithpots 2 сарын өмнө
Build some tree sliders put a place to rest feet on them and raise the set a little
Miro Nad
Miro Nad 2 сарын өмнө
Cut it in half and make it a foot or two longer
Clay Brown
Clay Brown 2 сарын өмнө
Needs headlights keep the circular....
Richard Browne
Richard Browne 2 сарын өмнө
🤣😂😁👍 "GET'ER'DONE!"
Ben Relle
Ben Relle 2 сарын өмнө
Ike looks like Donkey Kong in Mario Kart
spikeman dan
spikeman dan 2 сарын өмнө
@8:52 it’s called a swivel
Kolgahn Sullivan
Kolgahn Sullivan 2 сарын өмнө
You guys should those a Red Baron go kart
Kolgahn Sullivan
Kolgahn Sullivan 2 сарын өмнө
Using a wheelbarrow
bill dursa
bill dursa 2 сарын өмнө
This time Ike crashed it first.
Kendale Spencer
Kendale Spencer 2 сарын өмнө
The crab is what I had on my changes junk 4 welar
Kendale Spencer
Kendale Spencer 2 сарын өмнө
I think that it fets ike
DSR 2 сарын өмнө
I bet if that was adult sized it would probably be the fastest thing you have with how good the suspension is and the 4wd
dolphinvr4 2 сарын өмнө
NeoIsrafil 2 сарын өмнө
I like it, but its too small for adults imo. Id cut it at the middle and extend it a foot. Itll be more rectangle and less square like a real bronco is so itd be even better.
Jennifer Lee
Jennifer Lee 2 сарын өмнө
It’s called a swivel
Burgundy Phoenix
Burgundy Phoenix 2 сарын өмнө
Cody Smith
Cody Smith 2 сарын өмнө
What's the dynamic here does Ike work for John or vice versa who owns the property who own the channel it seems like John owns it and films Ikes skill
Greg Doherty
Greg Doherty 2 сарын өмнө
Like to order some merch. How?
M&S RC racing
M&S RC racing 2 сарын өмнө
Very cool but its way to small.
Danny holman
Danny holman 2 сарын өмнө
That bronco BE TOOTED UP harrrrd love the vids
Broo_sh 2 сарын өмнө
CarsandCameras If You Find Broken / Free Hakomatic 50/60 Floor Washer Machines Those Have Good Parts What You Can Use In Your Build Those Have Nice Pulleys Systems & 90degrees Stuff
Bryson Hughes
Bryson Hughes 2 сарын өмнө
You weight 180 to m 17 and weight 220 and I play football
Adam Root
Adam Root 2 сарын өмнө
so uh. wasnt this supposed to be for the camping trip with grind hard?
g0ldensample21 2 сарын өмнө
Don't take this the wrong way. I love what y'all do, and it's great content, but after it's complete and y'all take it for a ride, will you be chopping it, and extending it so you can actually ride it for realzies? Sitting just above the back axle seems like you are going to need wheelie bars so it doesn't flip backwards.
Bry Rus
Bry Rus 2 сарын өмнө
Make a new fast lawn mower
Matt Earnshaw
Matt Earnshaw 2 сарын өмнө
I think isaac's sat in it so he gets the first ride so john doesn't rap it round a tree lol sorry john
Cory Lewis
Cory Lewis 2 сарын өмнө
Would like to see y’all do another drag mini bike build
watahyahknow 2 сарын өмнө
it will be hard to steer without diffs
Scott Shaler
Scott Shaler 2 сарын өмнө
i would put foot pegs out the side of the body behind the front wheels. get your center of gravity and seating position better. and get your feet away from those chains.
JonnyMakesChemicals 2 сарын өмнө
yo i came up with a name for the go kart. The Cloud Kart. since both of you said it rides like a cloud.
Johnny Turbo
Johnny Turbo 2 сарын өмнө
NICE!, now I say you regear it and streach it 2-3 feet so you can actually enjoy driving it, and it wont wheelie to much once you regear it
Buddy Bradstreet
Buddy Bradstreet 2 сарын өмнө
Whatever u do don't let john drive it hel.hit the biggest tree as possible
yes sir
yes sir 2 сарын өмнө
I might of been better at this when I was ten. But that's why I watch. ENTERTAINING!
theR6969 2 сарын өмнө
To safely hammer on something threaded like that axle shaft, always thread the nut on until it's flush with the axle surface and hammer away without worrying about the threads being damaged.
texas roadhouse
texas roadhouse 2 сарын өмнө
You should do a turbo harley swap on the drag rail!!!
Heath Roush
Heath Roush 2 сарын өмнө
I'm glad that John is fine with Isaac being 180 lbs.
Art Johnson
Art Johnson 2 сарын өмнө
you might try and go up 1 tooth on front axle like the old 2wd mini bikes thats how they were so they could turn and not push
Rosko311 2 сарын өмнө
What kind of celebration do you guys have planned for your 1 million subs episode? I have been enjoying watching yall build carts & mini bikes for, dang, its been a few years now, basically since yall had around 100k subs. Keep it up!
pickle rick
pickle rick 2 сарын өмнө
If I am going to put a Mikuni 22mm on a predator 212 nonhemi what do you do with the governor arm do you just leave it flap in the breeze or do you take it of??
Tony Walton
Tony Walton 2 сарын өмнө
Make it longer please
Tony Walton
Tony Walton 2 сарын өмнө
Make it longer
Tony Walton
Tony Walton 2 сарын өмнө
Make it longer
Tony Walton
Tony Walton 2 сарын өмнө
Make it longer
Tony Walton
Tony Walton 2 сарын өмнө
Make it longer
The 603boys
The 603boys 2 сарын өмнө
You guys are gonna start losin fans the more you sellout to go power sports
Aaron Farrin
Aaron Farrin 2 сарын өмнө
I think it needs to be stretched another 8 in it's hard to tell not being there in person but it definitely needs to be maybe even a foot longer if you look at most of the power wheels builds that's about how much it seems like they stretch them if not a tiny bit more another thing I was thinking you guys could do is put a roll bar hoop that goes over your head and then you could put like Casey lights on it which would look really cool and be considerably safer just an idea guys keep up the good work stay safe
Sabrina Knight
Sabrina Knight 2 сарын өмнө
(from Mark C at ifixmgs@gmail.com) , In a pinch, I used an old 3/4" drive chrome steel Ujoint to take some of the stiffness out of the steering on a Case tractor that had a frozen sector joint.. It lasted for a couple of months before the chrome chipped off, rusted and the joint loosened up as constant motion work-hardened one of the pins to the point of failure. I found a 3/4" drive ball and socket style impact socket on ebay for $30 (vs the $100+ for the replacement part) and it's been working now for 4 or 5 years with no problems (the OE part was nearly $150 and was nearly impossible to grease without taking it completely apart ) In your case, a 1/2" drive universal impact socket would likely last forever.
Markus Riippa
Markus Riippa 2 сарын өмнө
looking fine
Halbostfriese 2 сарын өмнө
All those open chains look scary! :O
MISTO MICK 2 сарын өмнө
Is predator better than tilitson
handyhippie65 2 сарын өмнө
what the hell is wrong with using a universal swivel in the steering column linkage? if they're tuff enough to tighten bolts, they're tough enough to turn the wheels i'm sure. if you'd have used an impact swivel, it would be stronger than the column tubing that's connected to it. i think it's actually a good idea.
Bart Goins
Bart Goins 2 сарын өмнө
Why not the same sized tires front and rear like the real deal?
srvrace 2 сарын өмнө
The ads are just getting out of control man. I like you guys but damn. It’s making me want to click away.
Tall Boy
Tall Boy 2 сарын өмнө
The Angle of the Dangle ... or the Droop to the Loop!🤣😂👌
danssv8 2 сарын өмнө
Boys and their toys
Jakester 0909
Jakester 0909 2 сарын өмнө
Why build something so cool but make it so small just extend it to get more comfortable in there
Tim Z
Tim Z 2 сарын өмнө
Test drove it with the front chain off. I bet it turns a lot easier. I dont know if it and open diff in the front but that would free up a lot of scrubbing during turning.
hunter john
hunter john 2 сарын өмнө
I'm very curious, why did they not run the rear shocks a bit more vertical or similar to how a truck is set up ?
gavin cline
gavin cline 2 сарын өмнө
should have used a long extension for steering wheel and just used the u joint like normal. Have a quick disconnect wheel. Haha. Yes I know I know bad idea but still
Fight Till Death
Fight Till Death 2 сарын өмнө
So proud of the extensive knowledge you guys have learned over just a short amount of time? Great job fellas 🤘😁👍
Shiesty Duke
Shiesty Duke 2 сарын өмнө
can i buy that or something else from you guys please
The Tatted Fat Guy
The Tatted Fat Guy 2 сарын өмнө
@CarsandCameras Tit for tat on crash and things ‼️ Y'all both hit a tree 🌴
Timothy Black
Timothy Black 2 сарын өмнө
I also think u need to make it longer for ike and for better feet Position
Jon Schneider
Jon Schneider 2 сарын өмнө
Looks great! If you can drive the front just a tiny bit faster than the rear, it will steer a lot better.
Winter Wolf
Winter Wolf 2 сарын өмнө
You know they dont know what they're doing when they use a swivel socket for steering gtfo
Chad D
Chad D 2 сарын өмнө
I like the consistent set of music yall be using now =) .
cowbell 2 сарын өмнө
You guys should be careful welding around the shock shafts without covering them one splatter of weld sticks to it they are toast
WrenchandRip 2 сарын өмнө
no criticism here... send it bobby!
Ainsley P
Ainsley P 2 сарын өмнө
Hate to say it but I needs to be longer, I don’t imagine u guys even wanting to ride it
Connor Foy
Connor Foy 2 сарын өмнө
Would a winch put anuf weight on the front
Greyer Shade
Greyer Shade 2 сарын өмнө
10:45 Why do u guys always build stuff thats not comfortable to drive by normal sized humans? Even the purpose built trophy truck was completely built before u tried to put the pedals in a spot u could actually reach? I dnt understand why u guys do that on every build.
Carter Benson
Carter Benson 2 сарын өмнө
Haven't watched this channel in years, didn't ike use to have way more gray hair?
Chris DePuccio
Chris DePuccio 2 сарын өмнө
Love you guys by the way Cars and Cameras!
Chris DePuccio
Chris DePuccio 2 сарын өмнө
Just wanted to clarify, so I ordered over $350.00 worth of mini bike stuff from go power sports- wasn’t real happy with the price at all btw. $over $350 just for 2 tires an 2 rims, sprocket, chain, an drum brake. Ridiculous 1. An 2nd- I specifically told them over the phone that Cars and Cameras sent me an they pretty much told me- “Yea we don’t care” Got no discount what’s so ever! So I’m confused on what’s the point in mentioning who sent us if there’s zero discount???
galieric 2 сарын өмнө
Get Chris from rather b to make u a 2 speed jack shaft assembly
bubbasatrueredneck 2 сарын өмнө
Love it love yall from Franklin county nc
jmanlinc 2 сарын өмнө
Need some sort of steady bearing between the two universal joints so they stay aligned, would remove alot of the play
Mr Partridge
Mr Partridge 2 сарын өмнө
my first test drive of my friction drive scooter I had the gas tank strapped to my leg with bungee cords lol I looked at my wife and said It'll be fine hahahaha
Ian Allen
Ian Allen 2 сарын өмнө
Thumb throttle
BlkiceMike 2 сарын өмнө
Fabrizio Centrone
Fabrizio Centrone 2 сарын өмнө
the wobbly wrench is going to break
PyroTV 2 сарын өмнө
@carsandcameras Although this is a cool build...I don't feel like this bad boy is a 4x4... So your drive sprocket is ahead of your rear axle, pulling the chain, i.e. driving....But your drive sprocket is behind your front axle. You can't push power through a chain. Only Pull...Try to push a rope. I don't see your front axle being under "power". If your front tires are put under a load...The chain can't transmit the power forward(I.e. push) to PULL the front wheels free. I see some front chain bind or sprocket skipping in your future. Your front axle is "idling" with your rear...but not being driven. Rear wheel drive pushes and front wheel drive pulls...Near as i can Finger, you would have to power the front axle first, so you can pull the chain. then drive your rear axle off of your front axle, again pulling chain.
Cyle Burnett
Cyle Burnett 2 сарын өмнө
By far the best build yall have made in my opinion other than the cross kart, nice!!!!
Solid Cold
Solid Cold 2 сарын өмнө
Dangit bobby embrace the meme.
World's Fastest 1WD Go Kart?! | Built 212 Swap, HUGE Burnouts!
Үзсэн тоо 940мянга.
Home office tour (Pc set-up, Sneaker, Music room)
DamisUna B
Үзсэн тоо 55мянга.
NASA’S Perseverance Rover’s First 360 View of Mars (Official)
NASA Jet Propulsion Laboratory
Үзсэн тоо 6сая
Үзсэн тоо 45сая
4x4 Bronco Power Wheels Go Kart First Rip! | Mud Run, Jumps, & More!
Үзсэн тоо 156мянга.
Go Kart Mysteriously Appears at our Shop... Can We Make it Run and Ride?
The 100HP Power Wheels Jeep is Finished! Painting and Final Look!
Grind Hard Plumbing Co
Үзсэн тоо 1,7сая
Үзсэн тоо 170мянга.
100HP 4x4 Power Wheels Gets Tracks!
Grind Hard Plumbing Co
Үзсэн тоо 571мянга.
2JZ Lawn Mower Engine Teardown and Fabrication
Grind Hard Plumbing Co
Үзсэн тоо 232мянга.
BMW Truck Gets an eBay Turbo Kit
Grind Hard Plumbing Co
Үзсэн тоо 1,4сая
95HP Two Stroke Triple Powered Yard Kart Build Part4
rather B welding
Үзсэн тоо 88мянга.
Home office tour (Pc set-up, Sneaker, Music room)
DamisUna B
Үзсэн тоо 55мянга.
NASA’S Perseverance Rover’s First 360 View of Mars (Official)
NASA Jet Propulsion Laboratory
Үзсэн тоо 6сая
Үзсэн тоо 45сая